Garage Doors Make Bad Walls

02/09/2013 00:41

Garage doors require springs to work. Without a spring to lift the mass of the garage door, it would be impossible to open. There are two types of spring employed in garage door construction. Torsion springs and extension springs. Torsion springs are located above the top of your garage door when it is closed. Extension springs run along the tracks on either side of your door when it is open.

In most cases if one of your springs is busted it will be entirely not possible to open your garage door. The exception is if you have a single door and it is made of a light metal. In any case it's best not to attempt to open your door yourself. It may lead to injuries.

Need help soon? Try This garage door springs

If one of your garage door springs is broken, there's very little the typical house owner can do for herself. The only real alternative is to get in touch with a garage door company. They are all the time obtainable visit and replace your springs.

If you try to shut your garage door using your opener and the door goes part way down, then stops and goes back up, you most probably have something blocking your door's travel path. Or possibly not

At the base of the tracks on either side of your garage door opening, you may most likely discover a pair of stop/reverse lights. These lights are really a transmitter and a receiver of infrared beams. If the beam is interrupted your door will stop going down, reverse and go all the way back up. Generally your garage door light will flash when this happens.

At times your garage door eyes will stop and reverse your door when there is no apparent reason. One reason might be that your stop/reverse units have been bumped and are no longer pointing at each other. If you believe that is the problem, make use of the set screws or wing nuts to correct the lights, not a hammer.

If adjusting the beams doesn't resolve your problem, vigilantly look around the opening of your garage door. Whatever can be blocking the door's path may not be entirely apparent. Look carefully.

If there's nothing clearly blocking your garage door, don't tear your hair out. There's one more thing to try. Obtain a paper towel and clean the lenses on your stop/reverse lights. Occassionally condensation or a little bug or dust particle will get on the lense and cause all your stop/reverse problems.

The culprit could possibly be your garage door opener unit. Although they are exceptionally trustworthy, things can fail with them. The 2 significant replacement items with the opener unit are the gear sprocket and the logic or circuit board.

It is possible for a home owner to change both the gear sprocket and logic board. The trouble is obtaining the correct parts and learning exactly how to change each item. Sometimes life is a lot easier if you just phone a garage door specialist to do the replacement. They've helped hundreds of people and they can help you too.

Look here for futher information garage door opener

There are companies that work on all sorts and brands of garage doors. They are going to come to your house or business and carry out an entire repair and overhaul of your door if necessary. They change springs, rollers, tracks, sections, cables and entire garage doors.