Mending Your Garage Door

03/29/2013 19:47

Garage doors require springs to perform. Without a spring to lift the weight of the garage door, it would be impossible to open. There are two types of spring employed in garage door design. Torsion springs and extension springs. Torsion springs are found above the top of your garage door when it is shut. Extension springs go along the tracks on either side of your door when it is open.

In the majority of cases if one of your springs is broken it may be entirely not possible to open your garage door. The exception is if you have a single door and it is made of a light metal. In any case it is best not to attempt to open your door yourself. It might lead to injury.

Want assistance quickly? Evaluate this garage door repair

While the normal homeowner should never try to replace an torsion spring with no specific training, extension springs are possible to replace. Replacement springs can typically be found in big box stores.

There are some repairs you could make in your garage door. One of many options of a garage door opener is that it has stop reverse lights that will stop your garage door from closing if something is blocking its path.

If you look towards the underside of the tracks on either side of your garage door opening, one can find a set of "eyes". They're there for your safety in addition to the protection of your property and pets. If the beam is interrupted, your garage door will stop going down and begin going back up. Usually your garage door opener light may also flash.

It is possible that the stop/reverse lights are now not pointing at each other. If this is the case, it could be possible to adjust them in order that they point in the proper direction.

If adjusting the beams does not fix your difficulty, vigilantly look around the opening of your garage door. The object that might be blocking the door's path may not be totally obvious. Look carefully.

If you have looked high and low for the article blocking your garage door to the point that you have become frustrated, it may be that nothing is blocking it. Occassionally a fleck of dust, an insect or condensation has gotten on the lenses of your stop/reverse lights. Wipe the lenses with a dry cloth and see if that works.

Your garage door opener unit can fail. They're normally very reliable however they do have elements in them that can fail. Normally the failure of the opener is caused either by a worn gear sprocket or the logic board.

It is feasible for a home owner to change both the gear sprocket and logic board. The difficulty is finding the correct parts and learning exactly how to change each item. Sometimes life is less difficult if you just get in contact with a garage door specialist to perform the replacement. They've served hundreds of people and they can help you too.

Check here for futher information helpful hints

Garage doors are as a rule exceptionally reliable and taken for granted by their owners. That means that when one fails, it's typically a new experience for the average home owner. They are not aware of the existence of garage door companies and they are worried that their garage door will be costly to fix. Luckily garage door businesses are in a competitive environment and this keeps their fees reasonable. Give one of them a call. You may be pleasantly surprised.